We are all aware of plastering and its importance in building our homes. With not so many different properties we have rendering, a process similar to plastering. The plasterer from Andover and renderer from Andover will definitely agree on these point of view.

Difference between plaster and render

Plastering means coating of various types of paste on the interior of the wall. Whereas rendering basically deals with the exterior of the walls. Another major difference is the concentration or the amount of materials used in each process. The basic lime gypsum, sand, water and cement remains the same.

Rendering- It has a high concentration of cement, since it is used in the exterior of the building. It has dry additives, coloring agents. Lime gypsum is the used for creamy, smooth finishes and fine sand for excellent finish. It is applied to the outside of the walls like in sheets with various tools to give desired final look. This job is what matters as it is on the exterior.

It is the work done by an experienced professional. So, search for an experienced plasterer inAndover and get the finessed look. After all, you don’t want to mess the look of the house right?

Plastering- It has less cement than rendering and is done on the inside of the wall. It needs to be smooth and thick as it then painted over or covered with wallpaper. Plaster gives strength to the walls. It is an adhesive strong agent for the paint to give a smooth look.

The plaster needs to be dry and set before painting. The dried plasters are light colored and a uniformity is seen without any dark patches. What mostly effects the plaster is the heating in the room, seasonal conditions and proper ventilation. This ensure how quickly will plaster dry after each coat.

What can be called as the best render mix?

It is known that rendering has lot of cement mix. It needs to put both on the interior and exterior for a clear and smooth finish. It should the ability to be fire-resistant and water-proof.

The usual render has the standard ratio of sand, cement, and lime gypsum; 6:1:1. There is no typical sort of cement to be used for rendering. Any type will do. But the sand used should be completely fine materials, and free from all impurities. The building sand can be used for the top layer.

The most appropriate ratio is 6:1:1. The plasterer should not overdo it. The correct ratio of gypsum will give the suitable creamy and white finish. It will result in self-curing; means if the wall moves then render moves too. It can also re-calcify itself.

Modern render has silicone enhanced. Super breathable, but less likely to crack. It is a mixture if traditional and modern rendering technique. One of the most common mistakes by renderers is to skip lime, it breaks the consistency of the render. Thus, any buyer should visit the website of construction sites, before placing order.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *